Main types of vats that can be installed in bathrooms

Find out now the main features and differences between each type of tub – so you can make a better choice among the models that best fit your bathroom design:

Built-in tanks

Among one of the most popular models, the built-in tub is a more economical option and has a practical installation on the sink countertop. In this case, the tub is fixed under the edges of the bench stone. Generally, the bottom is closed with cabinets but in some cases it can stay open with the apparent tub.

Support tanks

The support tank is one of the models that has gained prominence, mainly by the great variety of models with differentiated design.

For installation of this type of tank, a hole is required to drain the water. Regarding the faucet, some models are embedded in the countertop and need one more hole; others are fixed to the bathroom wall, according to the hydraulics.

An important requirement that must be attacked is in relation to the height of the bench which must be lower than normal, so the tub is at the right height, within reach of the hands.

Overlap tanks

The overlay model is ideal for those who do not want to take up too much space below the bench. Similar to the built-in vat, the overlap fits into the worktop by the top, keeping its edges apparent. In these cases, the countertop should be larger than the tub itself and not very recommended for small toilets.

Semi-tanks

Semi-tanks are ideal models to be installed on narrower benches – it is elegant and has only the back fixed, the front is apparent and stands out on the bench, creating a differentiated effect.

For this type of model, it is recommended to use high nozzle taps. The semi-recess tub is more suitable for washrooms, where only the hands are washed – what happens is that when washing the face, the water flows through the arms, watering the floor more easily and too much.

Wall vats

This is a model that fits directly into the wall without the use of a stone countertop. In some cases there is no use of cabinets and the siphons become apparent in the bathroom look. The low spout tap is recommended and is usually attached to the tank itself.

Floor vats

This type of tub is a modern trend and is fixed to the floor, with a facility close to the wall. The water flow can be done even by the floor and in this case, it requires the adaptation of the project to contemplate this possibility.

Sculptured vats

Carved vats are usually sized to the bathroom design, using the countertop stone itself. In it is made a tear for the water flow. It is a super modern and elegant solution, however, with high cost and maintenance. The materials used can be silestone, nanoglass, marble, granite and others.

The most chosen materials for the manufacture of the vats

The vats used in bathrooms can be manufactured with different materials, know the main ones that can be found for sale in the market:

Glass

Glass vats should be used in basins for simpler use as they may scratch over time. The transparency of the glass is an interesting effect that leaves the environment looking clean.

Crockery and porcelain

Dishware is certainly the most widespread and popular material for vats with constant use, if you do not want to miss, this is the right choice for the vast majority of bathrooms.

Acrylic

The acrylic, in addition to the transparent effect, can be made with a certain color – it has effects similar to glass, although it is more resistant. However, it can also scratch and its use should be more basic.

Wood

The vats manufactured with wood are specially made for this purpose, with the right waterproofing, supporting the direct contact with the water. Consult the manufacturers who have tradition in this type of product.

Stainless Steel

Generally found in most kitchens, stainless steel vats have also gained spaces in bathrooms with different shapes. It is modern and stylish and can suit various decorating styles.

Copper

Copper is a differentiated material for use in the tub, these models refer to the style of industrial decoration and have a rustic footprint. They are usually found in restrooms in public areas and in commercial establishments, but can be part of the residential bathroom as well.

Handcrafted

Handcrafted vats are completely customized models with unique effects. They can be composed of various materials such as pottery, clay, glass and others. They are suitable for residential washrooms.

Main formats of vats available

In addition to all these materials, the vats can be manufactured in different formats. Get to know the main tub formats for bathrooms now:

Rectangular

The rectangular cuba model is modern and imposing, and is suitable for bathrooms with large benches because they tend to occupy a good space.

Square

The square model follows the same aesthetic of the rectangular one, nevertheless, it can fit in a little smaller benches.

Oval or round

The oval or rounded shape is the most chosen for most tanks, they fit a wide range of simpler benches and can be used as a support tank, taking up little space, and is applicable in small toilets.

With differentiated formats

How about innovating in bathroom decor? The tub models can be found in different and customized formats.